Here are the steps that will help you to grind stumps
Tree stumps are not only an eyesore but also a hazard for the people on the property. This is why it helps to remove them thoroughly. Among the many methods used, qualified Arborist Canterbury believe that using a tree stump grinder is an efficient way to clear the area. As a leading provider of tree care services, we have put together this guide about stump grinding to help you.
·
Prepare Your Work Area
Before using the machine, it helps to prepare the site by removing
any rocks and debris from around the stump. Then, cut the stump as close to the
ground as possible with the help of a chainsaw. Block off the area to keep pets
and people away from it.
·
Move the Stump Grinder into Position
After preparing the work
site, place the Tree Stump
Grinding Christchurch in the right position to
begin working. Make sure the angle is comfortable for you. Remember that you
may have to change the height and angle multiple times when grinding the stump.
However, avoid changing the position of the handle when the equipment is on.
Use the locks on the wheel if and when necessary.
·
Grind a Part of the Stump
Remember to reposition the grinder for more efficiency. It helps
to change the angle every time you drop down about 80 – 100 millimetres on the
stump. This will help you to get the work done quickly.
·
Reposition the Machine
Once the stump is reduced to ground level, push the equipment
towards the center of the trunk and lock its wheels in place. Set the handle at
a proper height and grind it until you end up with a cleared space.
·
Cover the Area with Soil
Switch off the ignition and make sure the stump grinder is
turned off completely. Fill the hole with fresh soil and wood chips to avoid
any safety hazards. You could also sow grass seed or any other seeds and rake
the layers to help them grow.
Disposing
of the Leftover Wood Chips After Stump Grinding
You can use some of the wood chips to fill the hole after
removing the stump. You could also use them for compost. If you do not have a
use for them, ask your neighbours or the local nurseries if they need them for
anything.
Business Name: Pro Arb Canterbury Ltd
Address:
91 Jeffs Drain Road, Ohoka 7692
Email:
proarb1@hotmail.com
Contact No:
+64800087337
Comments
Post a Comment